Common failures and causes of subwoofers

Dec 10, 2024

Leave a message

The sound quality improvement principle of coaxial speakers

Subwoofers are an important part of the sound system and are responsible for producing low-frequency sounds. However, due to long-term use or accidental damage, subwoofers may have various failures. The following are common failures of subwoofers and their possible causes:

1. The speaker cannot make sound

- Power supply problem: The power cord may be loose or the power switch is not turned on.

- Connection problem: The connection between the speaker and other components may be loose or disconnected.

- Damaged speaker unit: The voice coil or diaphragm inside the speaker unit may be damaged.

2. The sound from the speaker is distorted

- Too loud volume: Too high volume may cause the speaker unit to overload, resulting in distortion.

- Damaged speaker unit: The voice coil or diaphragm inside the speaker unit may be damaged.

- Improper frequency response: The frequency response of the sound system may be improperly set, resulting in excessive amplification of low or high frequencies.

3. The sound from the speaker is noisy

- Electrical interference: The speaker or other components may be subject to electrical interference, resulting in noise in the sound.

- Connection problem: The connection between the speaker and other components may be loose or in poor contact.
- Damaged speaker unit: The voice coil or diaphragm inside the speaker unit may be damaged.

4. The sound from the speaker has a buzzing sound

- Power supply interference: The speaker may be interfered with by the power supply, resulting in a buzzing sound in the sound.
- Damaged speaker unit: The voice coil or diaphragm inside the speaker unit may be damaged.
- Improper frequency response: The frequency response of the audio system may be improperly set, resulting in excessive amplification of the low frequency.

5. The sound from the speaker has a popping sound

- Too loud volume: Too high volume may cause the speaker unit to overload, resulting in popping sound.
- Damaged speaker unit: The voice coil or diaphragm inside the speaker unit may be damaged.
- Improper frequency response: The frequency response of the audio system may be improperly set, resulting in excessive amplification of the low frequency.

Summary

Common faults of subwoofers include no sound, distorted sound, noise, buzzing, and popping sound. These faults may be caused by power problems, connection problems, damaged speaker units, electrical interference, and improper frequency response. If your subwoofer has these problems, it is recommended to first check the power supply and connections, and then consider whether you need to replace the speaker unit or adjust the settings of the sound system. If the problem persists, it is recommended to consult a professional or seek professional help.

Send Inquiry